Sheet

Hot Roll

Hot Roll Commercial Steel - A 1011 CS Type B (CQ)

This specification covers hot-rolled carbon steel sheets of commercial quality, in coils and cut lengths, having a maximum carbon of 0.15%. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved. This specification is not intended for structural use.

Catalog

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Structural

ASTM A36

ASTM A36 is a structural quality carbon steel for use in welded, bolted or riveted construction of bridges and buildings, and for general structural purposes. Minimum yield strength of 36 KSI (250MPa) is required to meet the requirements of A36. ASTM A36 plate is used in a variety of applications which include, but not limited to; railroad cars, trucks, agriculture equipment, trailers, construction equipment, buildings and bridges

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Catalog

Mechanical Properties:

  • YP (MPa), min. 36 (250)
  • Tensile (MPa) 58-80 (400-550)
  • Elongation in 2" (50mm), min. % 23
  • Carbon Max % (thickness dependent) .25-.29

High Strength/Low Alloy

A 1011-F HSLAS gr50/gr60/gr80

This specification covers sheet hot-rolled, carbon, structural, high-strength low-alloy with improved formability, and strip, in coils and cut lengths. The addition of alloying elements raises the yield point offering higher strength-to-weight ratios. The product is intended for applications where higher strength, savings in weight, improved formability and weldability are important.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Catalog

Mechanical Properties:

  • YP (MPa), min. 50 (345), 60 (415), 80 (550)
  • Tensile (MPa), min. 60 (410), 70 (480), 90 (620)
  • Elongation in 2" (50mm), min. % 22, 20, 16

A1018 HSLAS-F gr50

This specification covers heavy gauge hot-rolled, carbon, structural, high-strength low-alloy with improved formability, and strip, in coils and cut lengths. The product is intended for applications where higher strength, savings in weight, improved formability and weldability are important.
 

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Catalog

Mechanical Properties:

  • YP (MPa), min.50 (345)
  • Tensile (MPa), min.60 (410)
  • Elongation in 2” (50mm), min. % 22

ASTM A572 gr50/gr60

A572 is a high strength low alloy steel that offers a higher strength than plain carbon steel plates – plus ductility, weldability, formability, toughness and fatigue strength. A572 meets a minimum strength requirement (dependent on grade) and provides good workability and weldability at a moderate price. A572 plate is used in a variety of applications which include, but not limited to; railroad cars, trucks, trailers, agriculture equipment, construction equipment, buildings and bridges. Charpy V-notch Impact Toughness and Maximum Tensile Strength are supplementary requirements that may be requested.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Catalog

Mechanical Properties:

  • YP (MPa), min. 50 (345), 60 (415)
  • Tensile (MPa), min. 65 (450), 75(520)
  • Elongation in 2" (50mm), min. % 21, 18

A656 gr80

This specification covers high-strength low-alloy, hot rolled structural steel plate for use in truck frames, brackets, crane booms, rail cars, and similar applications. Steels that conform to this specification offer improved formability. These steels are normally furnished in the as-rolled condition.

Available conditions: Hot Roll or Hot Roll Pickled & Oil

Catalog

Mechanical Properties:

  • YP (MPa), min.80 (550)
  • Tensile (MPa), min.90 (620)
  • Elongation in 2” (50mm), min. % 15

Abrasion Resistant

AR200/235

AR200/AR235 is an as-rolled, carbon-steel plate with a nominal hardness of between 180-235 HBW, intended for moderate wear applications. AR200/AR235 is available as cut-to-length plate and discrete plate. AR200/AR235 is not intended for structural applications. Typical applications for AR200/AR235 steel plate include cement mixer drums and fins, bulk material handling chute liners, skirt board liners, and screw conveyers.

Catalog

Floor Plate

Floor Plate (a786 - CS and A36)

This specification covers carbon, low-alloy, high strength low-alloy, and alloy steel hot-rolled floor plates for flooring, stairways, transportation equipment, and general structural purposes. While it is generally provided in the as-rolled condition, floor plate also may be provided in the heat-treated condition, depending on the material specification. Rolled floor plates have raised figures at regular intervals on one surface of the plate.

Catalog

Cold Rolled

A1008 CS Type B

This specification covers cold-rolled, carbon steel sheet, in coils and cut lengths. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved. This specification is not intended for structural use.

Catalog

Coated

Galvanized - A653 - CS Type B

This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hotdip process in coils and cut lengths

Catalog

© 2017. McNeilus Steel, Inc. All Rights Reserved
Minneapolis Web Design by Plaudit Design
Dodge Center, MN

(800) 733-6336

Fargo, ND

(888) 577-0007

Fond du Lac, WI

(866) 223-1277

ISO 9001:2008 Certified Employment Site Map