A2 -90 Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types. Volume 01.04
A6/A6M-99 Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling. Volume 01.04
A20/A20M-99a Specification for General Requirements for Steel Plates for Pressure Vessels. Volume 01.04
A21-94 Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use. Volume 01.05
A27/A27M-95 Specification for Steel Castings, Carbon, for General Application. Volume 01.02
A29/A29M-99 Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements. Volume 01.05
A31-95 Specification for Steel Rivets and Bars for Rivets, Pressure Vessels. Volume 01.08
A34/A34M-96 Practice for Sampling and Procurement Testing of Magnetic Materials. Volume 03.04
A36/A36M-97a Specification for Carbon Structural Steel. Volume 01.04
A47/A47M-99 Specification for Ferritic Malleable Iron Castings. Volume 01.02
A48-94a Specification for Gray Iron Castings. Volume 01.02
A48M-94 Specification for Gray Iron Castings. (Metric) Volume 01.02
A49-95 Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars. Volume 01.04
A53/A53M-99b Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. Volume 01.01
A65-87 Specification for Steel Track Spikes. Volume 01.04
A66-87 Specification for Steel Screw Spikes. Volume 01.04
A67-92 Specification
for Steel Tie Plates, Low Carbon and High-Carbon Hot-Worked. Volume 01.04
A74-98 Specification
for Cast Iron Soil Pipe and Fittings.
Volume 01.02
A82-97a
Specification for Steel Wire, Plain, for Concrete Reinforcement. Volume 01.04
A90/A90M-95a Test
Method for Weight of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy
Coatings. Volume 01.06
A99-82 Specification
for Ferromanganese. Volume 01.02
A100-93 Specification
for Ferrosilicon. Volume 01.02
A101-93 Specification
for Ferrochromium. Volume 01.02
A102-93 Specification
for Ferrovanadium. Volume 01.02
A105/A105M-98 Specification
for Carbon Steel Forgings for Piping Applications. Volume 01.01
A106-99 Specification
for Seamless Carbon Steel Pipe for High-Temperature Service. Volume 01.01
A108-99 Specification
for Steel Bars, Carbon, Cold-Finished, Standard Quality. Volume 01.05
A109/A109M-98a Specification
for Steel, Strip, Carbon, Cold-Rolled.
Volume 01.03
A111-99 Specification
for Zinc-Coated “Iron” Telephone and Telegraph Line Wire. Volume 01.06
A116-95 Specification
for Zinc-Coated Steel Woven Wire Fence Fabric.
Volume 01.06
A121-99 Specification
for Zinc-Coated Steel Barbed Wire.
Volume 01.06
A123/A123M-97a Specification
for Zinc Coatings on Iron and Steel Products.
Volume 01.06
A125-96 Specification
for Steel Springs, Helical, Heat-Treated.
Volume 01.05
A126-95 Specification
for Gray Iron Castings for Valves, Flanges, and Pipe Fittings. Volume 01.02
A128/A128M-93 Specification
for Steel Castings, Austenitic Manganese.
Volume 01.02
A131/A131M-94
Specification for Structural Steel for Ships. Volume 01.04
A132-89 Specification
for Ferromolybdenum Volume 01.02
A134-96 Specification
for Pipe, Steel, Electric-Fusion (Arc)-Welded.
Volume 01.01
A135-97 Specification
for Electric-Resistance-Welded Steel Pipe.
Volume 01.01
A139-96
Specification for Electric-Fusion (Arc)-Welded Steel Pipe. Volume 01.01
A143-74 Practice
for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel
Products and Procedure for Detecting Embrittlement. Volume 01.06
A144-73 Specification
for Ferrotungsten. Volume 01.02
A146-64 Specification
for Molybdenum Oxide Products. Volume
01.02
A148/A148M-93 Specification
for Steel Castings, High Strength, for Structural Purposes. Volume 01.02
A153/A153M-98 Specification
for Zinc Coating on Iron and Steel Hardware.
Volume 01.06
A159-83 Specification
for Automotive Gray Iron Castings.
Volume 01.02
A161-94 Specification
for Seamless Low-Carbon and Carbon-Molybdenum Steel Still Tubes for Refinery
Service. Volume 01.01
A167-99 Specification
for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and
Strip. Volume 01.03
A176-99 Specification
for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip. Volume 01.03
A178/A178M-95 Specification
for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler
and Superheater Tubes. Volume 01.01
A179/A179M-90a Specification
for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser
Tubes. Volume 01.01
A181/A181M-95b
Specification for Carbon Steel Forgings for General Purpose Piping. Volume 01.01
A182/A182M-98a Specification
for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and
Parts for High-Temperature Service.
Volume 01.01
A183-98 Specification
for Carbon Steel Track Bolts and Nuts.
Volume 01.04
A184/A184M-96
Specification for Fabricated Deformed Steel Bar Mats for Concrete
Reinforcement. Volume 01.04
A185-97 Specification
for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement. Volume 01.04
A192/A192M-91 Specification
for Seamless Carbon Steel Boiler Tubes for High-Pressure Service. Volume 01.01
A193/A193M-99a
specification for Alloy Steel and Stainless Steel Bolting Materials for
High-Temperature Service. Volume 01.01
A194/A194M-98b Specification
for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and
High-Temperature Service. Volume 01.01
A197/A197M-98 Specification
for Cupola Malleable Iron. Volume 01.02
A202/A202M-93 Specification
for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon. Volume 01.04
A203/A203M-97 Specification
for Pressure Vessel Plates, Alloy Steel, Nickel. Volume 01.04
A204/A204M-93 Specification
for Pressure Vessel Plates, Alloy Steel, Molybdenum. Volume 01.04
A209/A209M-98 Specification
for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes. Volume 01.01
A210/A210M-96 Specification
for Seamless Medium-Carbon Steel Boiler and Superheater Tubes. Volume 01.01
A213/A213M-99a
Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler,
Superheater, and Heat-Exchanger Tubes.
Volume 01.01
A214/A214M-96 Specification
for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser
Tubes. Volume 01.01
A216/A216M-93 Specification
for Steel Castings, Carbon, Suitabke for Fusion Welding, for High-Temperature
Service. Volume 01.02
A217/A217M-99
Specification for Steel Castings, Martensitic Stainless and Alloy, for
Pressure-Containing Parts Suitable for High-Temperature Service. Volume 01.02
A220/A220M-99 Specification
for Pearlitic Malleable Iron Castings.
Volume 01.02
A225/A225M-93 Specification
for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel. Volume 01.04
A227/A227M-99 Specification
for Steel Wire, Cold-Drawn for Mechanical Springs. Volume 01.03
A228/A228M-93 specification
for Steel Wire, Music Spring Quality.
Volume 01.03
A229/A229M-99 Specification
for Steel Wire, Oil-Tempered for Mechanical Springs. Volume 01.03
A230/A230M-99 Specification
for Steel Wire, Oil-Tempered Carbon Valve Spring Quality. Volume 01.03
A231/A231M-96 Specification
for Chromium-Vanadium Alloy Steel Spring Wire.
Volume 01.03
A232/A232M-99 Specification
for Chromium-Vanadium Alloy Steel Valve Spring Quality wire. Volume 01.03
A234/A234M-99 Specification
for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and
Elevated Temperatures. Volume 01.01
A239-95 Practice
for Locating the Thinnest Spot in a Zinc Coating on Iron or Steel
Articles. Volume 01.06
A240/A240M-99a Specification
for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet,
and Strip for Pressure Vessels. Volume
01.03
A242/A242M-98 Specification
for High-Strength Low-Alloy Structural Steel.
Volume 01.04
A247-67 Test
Method for Evaluating the Microstructure of Graphite in Iron Castings. Volume 01.02
A249/A249M-98 Specification
for Welded Austenitic Steel Boiler Superheater, Heat-Exchanger, and Condenser
Tubes. Volume 01.01
A250/A250M-95 Specification
for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater
Tubes. Volume 01.01
A252-98 Specification
for Welded and Seamless Steel Pipe Piles.
Volume 01.01
A254-97 Specification
for Copper-Brazed Steel Tubing. Volume
01.01
A255-99 Test Method for Determining Hardenability of
Steel. Volume 01.01
A262-98 Practices for Detecting Susceptibilty to Intergranular Attack in Austenic Stainless Steels. Volume 01.03
A263-94a Specification for Corrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip. Volume 01.03
A264-94a Specification for Stainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip. Volume 01.03
A265-94a Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate. Volume 01.03
A266/A266-96
Specification for Carbon Steel Forgings for Pressure Vessels Components. Volume 01.05
A268/A268M-96 Specification
for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for
General Service. Volume 01.01
A269-98
Specification for Seamless and Welded Austenitic Stainless Steel Tubing
for General Service. Volume 01.01
A270-98a Specification
for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing. Volume 01.01
A275/A275M-98 Test
Method for Magnetic Particle Examination of Steel Forgings. Volume 01.05
A276-98b Specification
for Stainless Steel Bars and Shapes.
Volume 01.03
A278-93 Specification for Gray Iron Castings for
Pressure Containing Parts for Temperatures Up to 650 degrees F. Volume 01.02
A278M-93 Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 350 degrees C. Volume 01.02
A283/A283M-98
Specification for Low and
Intermediate Tensile Strength
Carbon Steel Plates. Volume 01.04
A285/A285M-90 Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength. Volume 01.04
A288-91 Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators. Volume 01.05
A289/A289M-97 Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators. Volume 01.05
A290-95 Specification
for Carbon and Alloy Steel Forgings for Rings for Reduction Gears. Volume 01.05
A291-95 Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears. Volume 01.05
A295-98 Specification for High-Carbon Anti-Friction
Bearing Steel. Volume 01.05
A297/A297M-97 Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, for General Application. Volume 01.02
A299/A299M-97 Specification for Pressure Vessel Plates,
Carbon Steel, Manganese-Silicon. Volume
01.04
A302/A302M-97 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel. Volume 01.04
A304-96 Specification for Steel Bars, Alloy, Subject to End-Quench Hardenability Requirements. Volume 01.05
A307-97 Specification for Carbon Steel Bolts and
Studs, 60,000 PSI Tensile Strength.
Volume 01.08
A314-97 Specification for Stainless Steel Billets and Bars for Forging. Volume 01.03
A319-71 Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts. Volume 01.02
A320/A320M-98 Specification for Alloy Steel Bolting Materials for Low-Temperature Service. Volume 01.01
A321-90 Specification for Steel Bars, Carbon, Quenched and Tempered. Volume 01.05
A322-91 Specification for Steel Bars, Alloy, Standard Grades. Volume 01.05
A323-93 Specification for Ferroboron. Volume 01.02
A324-73 Specification for Ferrotitanium. Volume 01.02
A325-97 Specification for High-Strength Bolts for Structural Steel Joints. Volume 01.08
A325-97 Specification for High-Strength Bolts for Structural Steel Joints. Volume 01.08
A327-91 Test Methods for Impact Testing of Cast Irons. Volume 01.02
A327M-91 Test Methods for Impact Testing of Cast Irons. (Metric) Volume 01.02
A328/A328M-98 Specification for Steel Sheet Piling. Volume01.04
A331-95 Specification for Steel Bars, Alloy, Cold-Finished. Volume 01.05
A333/A333M-99 Specification for Seamless and Welded Steel Pipe for Low-Temperature Service. Volume 01.01
A334/A334M-99 Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service. Volume 01.01
A335/A335M-99 Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service. Volume 01.01
A336/A336M-99 Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts. Volume 01.05
A338-84 Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures up to 650 degrees F (345 degrees C). Volume 01.02
A340-99a Terminology of Symbols and Definitions Relating to Magnetic Testing. Volume 03.04
A341/A341M-95 Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Method. Volume 03.04
A342/A342M-99 Test Methods for Permeability of Feebly Magnetic Materials. Volume 03.04
A343-97 Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame. Volume 03.04
A345-98 Specification for Flat-Rolled Electrical Steels for Magnetic Applications. Volume 03.04
A348/A348M-95a Test Method for Alternating-Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10,000 HZ and 25-cm Epstein Frame. Volume 03.04
A350/A350M-99 Specification
for Carbon and Low-Alloy Steel Forgings Requiring Notch Toughness Testing for
Piping Components. Volume 01.01
A351/A351M-94a Specification
for Castings, Austenitic, Austenitic-Ferritic, for Pressure-Containing
Parts. Volume 01.02
A352/A352M-93 Specification
for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts,
Suitable for Low-Temperature Service.
Volume 01.02
A353/A353M-93 Specification
for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized
and Tempered. Volume 01.04
A354-98 Specification
for Quenched and Tempered Alloy Steel Bolts, Studs and Other Externally
Threaded Fasteners. Volume 01.08
A355-89 Specification
for Steel Bars, Alloys, for Nitriding.
Volume 01.05
A356/A356M-98 Specification
for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for
Steam Turbines. Volume 01.02
A358/A358M-98 Specification
for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for
High-Temperature Service. Volume 01.01
A363-98 Specification
for Zinc-Coated Steel Overhead Ground Wire Strand. Volume 01.06
A366/A366M-97 Specification
for Commercial Steel Sheet, Carbon, Cold-Rolled. Volume 01.03
A367-60 Test
Methods of Chill Testing of Cast Iron.
Volume 01.02
A368-95a Specification
for Stainless and Heat-Resisting Steel Wire Strand. Volume 01.03
A369/A369M-92 Specification
for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature
Service. Volume 01.01
A370-97a Test
Methods and Definitions for Mechanical Testing of Steel Products. Volumes
01.01, 01.02, 01.03, 01.04, 01.05
A372/A372M-99 Specification
for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels. Volume 01.05
A376/A376M-98 Specification
for Seamless Austenitic Steel Pipe for High-temperature Central-Station
Service. Volume 01.01
A377-95 Index
of Specifications for Ductile-Iron Pressure Pipe. Volume 01.02
A380-99 Practice
for Cleaning and Descaling Stainless Steel Parts Equipment, and Systems. Volume 01.03
A381-96 Specification
for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission
Systems. Volume 01.01
A384-76 Practice
for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of
Steel Assemblies. Volume 01.06
A385-98 Practice
for Providing High-Quality Zinc Coatings.
Volume 01.06
A387/A387M-99 Specification
for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum. Volume 01.04
A388/A388M-95 Practice
for Ultrasonic Examination of Heavy Steel Forgings. Volume 01.05
A389/A389M-93 Specification
for Steel Castings,Alloy, Specially Heat-Treated for Pressure-Containing Parts,
Suitable for High-Temperature Service.
Volume 01.02
A390-95 Specification
for Zinc-Coated Steel Poultry Fence Fabric.
Volume 01.06
A391/A391M-98 Specification
for Grade 80 Alloy Steel Chain. Volume
01.05
A392-96 Specification
for Zinc-Coated Steel Chain-Link Fence Fabric.
Volume 01.06
A394-93 Specification for Steel
Transmission Tower Bolts, Zinc-Coated and Bare. Volume 01.08
A395/A395M-98 Specification for Ferritic
Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures. Volume 01.02
A400-69 Practice for Steel Bars,
Selection Guide, Composition, and Mechanical Properties. Volume 01.05
A401/A401M-98 Specification for Steel
Wire, Chromium-Silicon Alloy. Volume
01.03
A403/A403M-99 Specification for Wrought
Austenitic Stainless Steel Piping Fittings.
Volume 01.01
A407-93 Specification for Steel
Wire, Cold-Drawn, for Coiled-Type Springs.
Volume 01.03
A409/A409M-95a Specification for Welded Large
Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service. Volume 01.01
A411-98 Specification for Zinc-Coated
Low-Carbon Steel Armor Wire. Volume
01.06
A413/A413M-96 Specification for Carbon
Steel Chain. Volume 01.05
A414/A414M-98 Specification for Steel,
Sheet, Carbon, for Pressure Vessels.
Volume 01.03
A416/A416M-98 Specification for Steel
Strand, Uncoated Seven-Wire for Prestressed Concrete. Volume 01.04
A417-93 Specification for Steel
Wire, Cold-Drawn, for Zig-Zag square-Formed, and Sinuous-type Upholstery Spring
Units. Volume 01.03
A418-96 Test Method for Ultrasonic
Examination of Turbine and Generator Steel Rotor Forgings. Volume 01.05
A420/A420M-96a Specification for Piping
Fittings of Wrought carbon Steel and Alloy Steel for Low-Temperature
Service. Volume 01.01
A421/A421M-98a Specification for Uncoated
Stress-Relieved Steel Wire for Prestressed Concrete. Volume 01.04
A423/A423M-95 Specification for Seamless
and Electric-Welded Low-Alloy Steel Tubes.
Volume 01.01
A424-97 Specification for Steel,
Sheet, for Porcelain Enameling. Volume
01.03
A426-92 Specification for
Centrifugally Cast Ferritic Alloy Steel Pipe for High-temperature Service. Volume 01.01
A427-74 Specification for Wrought
Alloy Steel Rolls for Cold and Hot Reduction.
Volume 01.05
A428/A428M-95 Test Method for Weight of
Coating on Alumium-Coated Iron or Steel Articles. Volume 01.06
A434-90a Specification for Steel
Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered. Volume 01.05
A435/A435M-90 Specification for
Straight-Beam Ultrasonic Examination of Steel Plates. Volume 01.04
A436-84 Specification for
Austenitic Gray Iron Castings. Volume
01.02
A437/A437M-99 Specification for Alloy-Steel
Turbine-Type Bolting Material Specially Treated for High-Temperature
service. Volume 01.01
A438-80 Test Method for Transverse
Testing of Gray Cast Iron. Volume 01.02
A439-83 Specification for Austenitic
Ductile Iron Castings. Volume 01.02
A447/A447M-93 Specification for Steel
Castings, Chromium-Nickel-Iron Alloy, for High-Temperature Service. Volume 01.02
A449-93 Specification for Quenched
and Tempered Steel Bolts and Studs.
Volume 01.08
A450/A450M-96a Specification for General
Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes. Volume 01.01
A451-93 Specification for
Centrifugally cast Austenitic Steel Pipe for High-Temperature Service. Volume 01.01
A453/A453M-99 Specification for
High-Temperature Bolting Materials, With Expansion Coefficients Comparable to
Austenitic Steels. Volume 01.01
A455/A455M-90 Specification for Pressure
Vessel Plates, Carbon Steel, High-Strength Manganese. Volume 01.04
A456/A456M-95-a Specification for Magnetic
Particle Examination of Large Crankshaft Forgings. Volume 01.05
A459-97 Specification for
Zinc-Coated Flat Steel Armoring Tape. Volume 01.06
A460-94 Specification for
Copper-Clad Steel Wire Strand. Volume
01.06
A463/A463M-99a Specification for Steel
Sheet, Aluminum-Coated, by the Hot-Dip Process. Volume 01.06
A466/A466M-98 Specification for Weldless
Chain. Volume 01.05
A467/A467M-98 Specification for Machine
and Coil Chain. Volume 01.05
A469-94a Specification for
Vacuum-Treated Steel Forgings for Generator Rotors. Volume 01.05
A470-98 Specification for
Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and
Shafts. Volume 01.05
A471-94 Specification for
Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels. Volume 01.05
A472-98 Test Method for Heat
Stability of Steam Turbine Shafts and Rotor Forgings. Volume 01.05
A473-99 Specification for
Stainless and Heat-Resisting Steel Forgings.
Volume 01.03
A474-98 Specification for
Aluminum-Coated Steel Wire Strand.
Volume 01.06
A475-98 Specification for
Zinc-Coated Steel Wire Strand. Volume
01.06
A476-90 Specification for Ductile
Iron Castings for Paper Mill Dryer Rolls.
Volume 01.02
A476M-84 Specification for Ductile
Iron Castings for Paper Mill Dryer Rolls.
(Metric) Volume 01.02
A478-97 Specification for
Chromium-Nickel Stainless and Heat-Resisting Steel Weaving and Knitting
Wire. Volume 01.03
A479/A479M-99 Specification for
Stainless and Heat-Resisting Steel Bars and Shapes for Use in Boilers and Other
Pressure Vessels. Volume 01.03
A480/A480M-99a Specification for General
Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet,
and Strip. Volume 01.03
A481-94 Specification for Chromium
Metal. Volume 01.02
A482-93 Specification for
Ferrochrome-silicon. Volume 01.02
A483-64 Specification for
Silicomanganese. Volume 01.02
A484/A484M-98 Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings. Volume 01.03
A485-94 Specification for High
Hardenability Antifriction Bearing Steel.
Volume 01.05
A487/A487M-93 Specification for Steel
Castings Suitable for Pressure Service.
Volume 01.02
A488/A488M-99 Practice for Steel
Castings, Welding, Qualification of Procedures and Personal. Volume 01.02
A489-93 Specification for Carbon
Steel Lifting Eyes. Volume 01.08
A490-97 Specification for
Heat-Treated Steel Structural Bolts, 150 ksi MinimumTensile Strength. Volume 01.08
A490M-93 Specification for
High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints
(Metric). Volume 01.08
A491-96 Specification for
Aluminum-Coated Steel Chain-Link Fence Fabric.
Volume 01.06
A492-95 Specification for
Stainless Steel Rope Wire. Volume 01.03
A493-95
Specification for Stainless and Heat-Resistance Steel Wire and Wire Rods
for Cold Heading and Cold Forging.
Volume 01.03
A494/A494M-99 Specification for
Castings, Nickel and Nickel-Alloy.
Volume 01.02
A495-94 Specification for Calcium-Silicon
Alloys. Volume 01.02
A496-97a Specification for Steel
Wire, Deformed, for Concrete Reinforcement.
Volume 01.04
A497-97 Specification for Steel
Welded Wire Fabric, Deformed, for Concrete Reinforcement. Volume 01.04
A498-98 Specification for Seamless
and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes
with Integral Fins. Volume 01.01
A499-89 Specification for Steel
Bars and Shapes, Carbon Rolled from “T-Rails.”
Volume 01.05
A500-99 Specification for
Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and
Shapes. Volume 01.01
A501-99 Specification for
Hot-Formed Welded and Seamless Carbon Steel Structural Tubing. Volume 01.01
A503-75 Specification for
Ultrasonic Examination of Large Forged Crankshafts. Volume 01.05
A504-93 Specificationb for Wrought
Carbon Steel Wheels. Volume 01.05
A505-87 Specification for Steel,
Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements
for. Volume 01.03
A506-93 Specification for Steel,
Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Regular Quality and
Structural Quality. Volume 01.03
A507-93 Specification for Steel,
Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Drawing Quality. Volume 01.03
A508/A508M-95 Specification for Quenched
and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure
Vessels. Volume 01.05
A510-96 Specification for General
Requirements for Wire Rods and Coarse Round Wire, Carbon Steel. Volume 01.03
A510M-96 Specification for General
Requirements for Wire Rods and Coarse Round Wire, Carbon Steel (Metric). Volume 01.03
A511-96 Specification for Seamless
Stainless Steel Mechanical Tubing.
Volume 01.01
A512-96 Specification for
Cold-Drawn Buttweld Carbon Steel Mechanical Tubing. Volume 01.01
A513-98 Specification for
Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing. Volume 01.01
A514/A514M-94a Specification for
High-Yield Strength, Quenched and Tempered Alloy Steel Plate, Suitable for
Welding. Volume 01.04
A515/A515M-92 Specification for Pressure
Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature
Service. Volume 01.04
A516/A516M-90 Specification for Pressure
Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service. Volume 01.04
A517/A517M-93 Specification for Pressure
Vessel Plates, Alloy Steel, High-Strength, Quenched and tempered. Volume 01.04
A518-92 Specification for
Corrosion-Resistant High-Silicon Iron Castings. Volume 01.02
A518M-92 Specification for
Corrosion-Resistant High-Silicon Iron Castings. Volume 01.02
A519-96 Specification for Seamless
Carbon and Alloy Steel Mechanical Tubing. Tubing 01.01
A520-97 Specification for
Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon
Steel Tubular Products for High-Temperature Service Conforming to ISO
Recommendations for Boiler Construction.
Volume 01.01
A521-96 Specification for Steel,
Closed-Impression die Forgings for General Industrial Use. Volume 01.05
A522/A522M-95b Specification for Forged
or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for
Low-Temperature Service. Volume 01.01
A523-96 Specification for Plain
End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure
Pipe-Type Cable Circuits. Volume 01.01
A524-96 Specification for Seamless
Carbon Steel Pipe for Atmospheric and Lower Temperature. Volume 01.01
A529/A529M-96 Specification for
High-Strength Carbon-Manganese Steel of Structural Quality. Volume 01.04
A530/A530M-99 Specification for General
Requirements for Specialized Carbon and Alloy Steel Pipe. Volume 01.01
A531/A531M-91 Practice for Ultrasonic
Inspection of Turbine-Generator Steel Retaining Rings. Volume 01.05
A532/A532M93a Specification for
Abrasion-Resistant Cast Irons. Volume
01.02
A533/A533M-93 Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel. Volume
01.04
A534-94 Specification for Carburizing
Steels for Anti-Friction Bearings.
Volume 01.05
A536-84 Specification for Ductile
Iron Castings. Volume 01.02
A537/A537M-95 Specification for Pressure
Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel. Volume 01.04
A539-99 Specification for
Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines. Volume 01.01
A540/A540M-98 Specification for
Alloy-Steel Bolting Materials for Special Applications. Volume 01.01
A541/A541M-95 Specification for Quenched
and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel
Components. Volume 01.05
A542/A542M-99 Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-And-Tempered, Chromium-Molybdenum and
Chromium-Molybdenum-Vanadium. Volume
01.04
A543/A543M-93 Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and tempered
Nickel-Chromium-Molybdenum. Volume
01.04
A550-78 Specification for
Ferrocolumbium. Volume 01.02
A551-94 Specification for Steel
Tires. Volume 01.05
A553/A553M-95 Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9% Nickel. Volume 01.04
A554-98 Specification for Welded
Stainless Steel Mechanical Tubing.
Volume 01.01
A555/A555M-97 Specification for General
Requirements for Stainless Steel Wire and Wire Rods. Volume 01.03
A556/A556M-96 Specification for Seamless
Cold-Drawn Carbon Steel Feedwater Heater tubes. Volume 01.01
A560/A560M-93 Specification for
Castings, Chromium-Nickel Alloy. Volume
01.02
A561-71 Practice for Macroetch
Testing of Tool Steel Bars. Volume
01.05
A562/A562M-90 Specification for Pressure
Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Mettalic
Coatings. Volume 01.04
A563-97 Specification for Carbon and Alloy Steel Nuts. Volume 01.08
A563M-97 Specification for Carbon
and Alloy Steel Nuts (Metric). Volume
01.08
A564/A564M-99 Specification for
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and
Shapes. Volume 01.03
A565-97 Specification for
Martensitic Stainless Steel Bars, Forgings, and Forging Stock for
High-temperature Service. Volume 01.05
A568/A568M-98 Specification for Steel,
Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled,
General Requirements for. Volume 01.03
A569/A569M-98 Specification for Steel,
Carbon (0.15 Max. %) Hot-Rolled Sheet and Strip Commercial Quality. Volume 01.03
A570/A570M-98 Specification for Steel,
Sheet and Strip, Carbon, Hot-Rolled, Structural Quality. Voilume 01.03
A571-84 Specification for
Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for
Low- Temperature Service. Volume 01.02
A571M-84 Specification for
Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for
Low-Temperature Service (Metric).
Volume 01.02
A572/A572M-99a Specification for
High-Strength Low-Alloy Columbium-Vanadium Structural Steel. Volume 01.04
A573/A573M-93a Specification for
Structural Carbon Steel Plates of Improved Toughness. Volume 01.04
A574-98a Specification for Alloy
Steel Socket-Head Cap Screws. Volume
01.08
A574M-98a Specification for Alloy
Steel Socket-Head Cap Screws (Metric).
Volume 01.08
A575-96 Specification for Steel
Bars, Carbon, Merchant Quality, M-Grades.
Volume 01.05
A576-90b Specification for Steel
Bars, Carbon, Hot-Wrought, Special Quality.
Volume 01.05
A577/A577M-90 Specification for
Ultrasonic Angle-Beam Examination of Steel Plates. Volume 01.04
A578/A578M-96 Specification for
Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special
Applications. Volume 01.04
A579-92 Specification for Superstrength
Alloy Steel Forgings. Volume 01.05
A580/A580M-98 Specification for
Stainless and Heat-Resisting Steel Wire.
Volume 01.03
A581/A581M-95b Specification for
Free-Machining Stainless and Heat-Resisting Steel Wire and Wire Rods. Volume 01.03
A582/A582M-95b Specification for
Free-Machining Stainless and Heat-Resisting Steel Bars. Volume 01.03
A583-93 Specification for Cast
Steel Wheels for Railway Service.
Volume 01.02
A584-97 Specification for
Aluminum-Coated Steel Woven Wire Fence Fabric.
Volume 01.06
A585-97 Specification for
Aluminum-Coated Steel Barbed Wire.
Volume 01.06
A586-98 Specification for
Zinc-Coated Parallel and Helical Steel Wire Structural Strand. Volume 01.06
A587-96 Specification for
Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical
Industry. Volume 01.01
A588/A588M-97a Specification for
High-Strength Low-Alloy Structural Steel with 50 ksi [345Mpa] Minimum Yield Point to 4 in. [100 mm] Thick. Volume 01.04
A589-96 Specification for Seamless
and Welded Carbon Steel Water-Well Pipe.
Volume 01.01
A591/A591M-98 Specification for Steel
Sheet, Electrolytic Zinc-Coated, for Light Coating Mass Applications. Volume 01.06
A592/A592M-89 Specification for
High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts
for Pressure Vessels. Volume 01.05
A595-98 Specification for Steel
Tubes, Low-Carbon, Tapered for Structural Use.
Volume 01.01
A596/A596M-95 Test Method for
Direct-Current Magnetic Properties of Materials Using the Ballistic Method and
Ring Specimens. Volume 03.04
A597-87 Specification for Cast
Tool Steel. Volume 01.05
A598-92 Test Method For Magnetic
Properties Of Magnetic Amplifier Cores.
Volume 03.04
A599/A599M-92 Specification for Tin Mill
Products, Electrolytic Tin-Coated, Cold-Rolled Sheet. Volume 01.06
A600-92a Specification for Tool
Steel High Speed. Volume 01.05
A601-96 Specification for
Electrolytic Manganese Metal. Volume
01.02
A602-94 Specification for
Automotive Malleable Iron Castings.
Volume 01.02
A603-98 Specification for
Zinc-Coated Steel Structural Wire Rope.
Volume 01.06
A604-93 Test Method for Macroetch
Testing of Consumable Electrode Remelted Steel Bars and Billets. Volume 01.05
A606-98 Specification for Steel,
Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with
Improved Atmospheric Corrosion Resistance.
Volume 01.03
A607-98 Specification for Steel,
Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both,
Hot-Rolled and Cold-Rolled. Volume
01.03
A608-91a Specification for
Centrifugally Cast Iron-Chromium-Nickel high-Alloy Tubing for Pressure
Application at High Temperatures.
Volume 01.01
A609/A609M-91 Practice for Castings,
Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof. Volume 01.02
A610-79 Test Methods for Sampling
and Testing Ferroalloys for Determination of Size. Volume 01.02
A611-97 Specification for
Structural Steel (SS), Sheet, Carbon,
Cold-Rolled. Volume 01.03
A612/A612M-98 Specification for Pressure
Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature
Service. Volume 01.04
A615/A615M-96a Specification for Deformed
and Plain Billet-Steel Bars for Concrete Reinforcement. Volume 01.04
A616/A616M-96a Specification for Rail-Steel
Deformed and Plain Bars for Concrete Reinforcement. Volume 01.04
A617/A617M-96a Specification for
Axle-Steel Deformed and Plain Bars for Concrete Reinforcement. Volume 01.04
A618-99 Specification for
Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing. Volume 01.01
A620/A620M-97 Specification for Drawing
Steel (DS) Sheet, Carbon, Cold-Rolled.
Volume 01.03
A622/A622M-97 Specification for Drawing
Steel (DS), Sheet and Strip, Carbon, Hot-Rolled. Volume 01.03
A623-98a Specification for Tin Mill
Products, General Requirements. Volume
01.06
A623M-98 Specification for Tin Mill
Products, General Requirements (Metric).
Volume 01.06
A624/A624M-98 Specification for Tin Mill
Products, Electrolytic Tin Plate, Single Reduced. Volume 01.06
A625/A625M-98 Specification for Tin Mill
Products, Black Plate, Single Reduced.
Volume 01.06
A626/A626M-98 Specification for Tin Mill
Products, Electrolytic Tin Plate, Double Reduced. Volume 01.06
A627-95 Specification for
Homogeneous Tool-Resisting Steel Bars for Security Applications. Volume 15.08
A629-88 Specification for
Tool-Resisting Steel Flat Bars and Shapes for Security Applications. Volume 15.08
A630-98 Test Methods for
Determination of Tin Coating Weights for Hot-Dip and Electrolytic Tin
Plate. Volume 01.06
A632-98 Specification for Seamless
and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General
Service. Volume 01.01
A633/A633M-95 Specification for
Normalized High-Strength Low-Alloy Structural Steel Plates. Volume 01.04
A635/A635M-98 Specification for Steel,
Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled. Volume 01.03
A636-76 Specification for Nickel
Oxide Sinter. Volume 01.02
A638/A638M-95 Specification for
Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock
for High-Temperature Service. Volume
01.03
A640-97 Specification for
Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable. Volume 01.06
A641/A641M-98 Specification for
Zinc-Coated (Galvanized) Carbon Steel Wire.
Volume 01.06
A644-98 Terminology Relating to
Iron Castings. Volume 01.02
A645/A645M-99a Specification for Pressure
Vessel Plates, 5% Nickel Alloy Steel, Specially Heat Treated. Volume 01.04
A646-95 Specification for Premium
Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace
Forgings. Volume 01.05
A648-95 Specification for Steel
Wire, Hard Drawn for Prestressing Concrete Pipe. Volume 01.04
A649/A649M-98a Specification for Forged
Steel Rolls Used for Corrugating Paper Machinery. Volume 01.05
A650/A650M-98 Specification for Tin Mill
Products, Black Plate, Double Reduced.
Volume 01.06
A653/A653M-99 Specification for Steel
Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the
Hot-Dip Process. Volume 01.06
A656/A656M-98 Specification for
Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved
Formability. Volume 01.04
A657/A657M-98a Specification for Tin Mill
Products, Black Plate Electrolytic Chromium-Coated, Single and Double
Reduced. Volume 01.06
A659/A659M-97 Specification for
Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Max. to 0.25 Max. %),
Hot-Rolled. Volume 01.03
A660-96 Specification for
Centrifugally Cast Carbon Steel Pipe for High-Temperature Service. Volume 01.01
A662/A662M-99 Specification for Pressure
Vessel Plates, Carbon-Manganese, for Moderate and Lower Temperature
Service. Volume 01.04
A663/A663M-89 Specification for Steel
Bars, Carbon, Merchant Quality, Mechanical Properties. Volume 01.05
A664-99 Practice for
Identification of Standard Electrical- and Lamination-Steel Grades in ASTM
Specifications. Volume 03.04
A666-99 Specification for Annealed
or Cold-Worked Austenitic Stainless Steel, Sheet, Strip, Plate, and Flat
Bar. Volume 01.03
A667/A667M-87 Specification for
Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders. Volume 01.02
A668/A668M-96 Specification for Steel
Forgings, Carbon and Alloy, for General Industrial Use. Volume 01.05
A671-96 Specification for Electric-Fusion-Welded
Steel Pipe for Atmospheric and Lower Temperatures. Volume 01.01
A672-96 Specification for
Electric-Fusion-welded Steel Pipe for High-Pressure Service at Moderate
Temperatures. Volume 01.01
A673/A673M-95 Specification for Sampling
Procedure for Impact Testing of Structural Steel. Volume 01.04
A674-95 Practice for Polythylene
Encasement for Ductile Iron Piping for water or Other Liquids. Volume 01.02
A675/A675M-90a Specification for Steel
Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties. Volume 01.05
A677-99a Specification for
Nonoriented Electrical Steel, Fully Processed Types. Volume 03.04
A677M-98a Specification for
Nonoriented Electrical Steel, Fully Processed Types (Metric). Volume 03.04
A678/A678M-94a Specification for
Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel
Plates. Volume 01.04
A679/A679M-93 Specification for Steel
Wire, High tensile Strength, Hard Drawn.
Volume 01.03
A681-94 Specification for Tool
Steels Alloy. Volume 01.05
A682/A682M-98a Specification for Steel,
Strip, High-Carbon, Cold-Rolled, General Requirements. Volume 01.03
A683/A683M-99 Specification for
Nonoriented Electrical Steel, Semiprocessed Types. Volume 03.04
A684/A684M-86 Specification for Steel,
Strip, High-Carbon, Cold-Rolled. Volume
01.03
A686-92 Specification for Tool
Steel, Carbon. Volume 01.05
A688/A688M-98 Specification for Welded
Austenitic Stainless Steel Feedwater Heater Tubes. Volume 01.01
A689-97 Specification for Carbon
and Alloy Steel Bars for Springs.
Volume 01.05
A690/A690M-94 Specification for
High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine
Environments. Volume 01.04
A691-98 Specification for Carbon
and Alloy Steel Pipe, Electric Fusion-Welded for High-Pressure Service at High
temperature. Volume 01.01
A693-93 Specification for
Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and
Strip. Volume 01.03
A694/A694M-98a Specification for Carbon
and Alloy Steel Forgings for Pipe Flanges, Valves, and Parts for High-Pressure
Transmission Service. Volume 01.01
A695-90b Specification for Steel
Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications. Volume 01.05
A696-90a Specification for Steel
Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure
Piping Components. Volume 01.05
A697-98 test Method for
Alternating Current Magnetic Properties of Laminated Core Specimens Using
Voltmeter-Ammeter-Wattmeter Methods.
Volume 03.04
A698/A698M-92 test Method for Magnetic
Shield Efficiency in Attenuating Alternating Magnetic Fields. Volume 03.04
A700-90 Practices for Packaging,
Marking, and Loading Methods for Steel Products for Domestic Shipment. Volume 01.05
A701-96 Specification for
Ferromanganese-silicon. Volume 01.02
A702-89 Specification for Steel
Fence Posts and Assemblies, Hot-Wrought.
Volume 01.05
A703/A703M-99 Specification for Steel
Castings, General Requirements, for Pressure-Containing Parts. Volume 01.02
A704/A704M-96 Specification for welded
Steel Plain Bar or Rod Mats for Concrete Reinforcement. Volume 01.04
A705/A705M-95 Specification for
Age-Hardening Stainless and Heat-Resisting Steel Forgings. Volume 01.03
A706/A706M-98 Specification for
Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement. Volume 01.04
A707/A707M-98 Specification for Forged
Carbon and Alloy Steel Flanges, for Low-temperature Service. Volume 01.01
A709/A709M-97b Specificationb for Carbon
and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and
Quenched-and-Tempered Alloy Structural Steel Plates for Bridges. Volume 01.04
A710/A710M-95 Specification for
Age-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy
Structural Steel Plates. Volume 01.04
A711-92 Specification for Steel
Forging Stock. Volume 01.05
A712-97 test Method for Electrical
Resistivity of Soft Magnetic Alloys.
Volume 03.04
A713-93 Specification for Steel
Wire, High-Carbon Spring, for Heat-treated Components. Volume 01.03
A714-99 Specification for
High-Strength Low-Alloy welded and Seamless Steel Pipe. Volume 01.01
A715-98 Specifications for Steel
Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet,
Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability. Volume 01.03
A716-95 Specification for Ductile
Iron Culvert Pipe. Volume 01.02
A717/A717M-95 Test Method for Surface
Insulation Resistivity of Single-Strip Specimens. Volume 03.04
A719-97 Test Method for Lamination
Factor of Magnetic Materials. Volume
03.04
A720-97 Test Method for Ductility
of Nonoriented Electrical Steel. Volume
03.04
A721-97 test Method for Ductility
of Oriented electrical Steel. Volume
03.04
A722/A722M-98 Specification for Uncoated
High-Strength Steel Bar for Prestressing Concrete. Volume 01.04
A723/A723M-94 Specification for Alloy
Steel Forgings for High-Strength Pressure Component Application. Volume 01.05
A724/A724M-99 Specification for Pressure
Vessel Plates, Carbon Steel, Quenched and tempered, for Welded Layered Pressure
Vessels. Volume 01.04
A726/A726M-99 Specification for
cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types. Volume 03.04
A727/A727M-97 Specification for Carbon
steel Forgings, for Piping Components with Inherent Notch Toughness. Volume 01.01
A729-93 Specification for Alloy
Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service. Volume 01.05
A730-93 Specification for
Forgings, Carbon and Alloy Steel, for Railway Use. Volume 01.05
A732/A732M-98 Specification for
Castings, Investment, Carbon and Low Alloy Steel for General Application, and
Cobalt Alloy for High Strength at Elevated Temperatures. Volume 01.02
A733-99 Specification for Welded
and Seamless Carbon Steel Austenitic Stainless Steel Pipe Nipples. Volume 01.01
A734/A734M-87a Specification for Pressure
Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched and
Tempered. Volume 01.04
A735/A735M-99 Specification for Pressure
Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for
Moderate and Lower Temperature Service.
Volume 01.04
A736/A736M-88 Specification for Pressure
Vessel Plates, Low-Carbon Age-Hardening
Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel. Volume 01.04
A737/A737M-99 Specification for Pressure
Vessel Plates, High-Strength, Low-Alloy Steel
Volume 01.04
A738/A738M-90 Specification for Pressure
Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and
Lower Temperature Service. Volume 01.04
A739-90a Specification for Steel
Bars, Alloys, Hot-Wrought, for Elevated Temperature or Pressure-Containing
Parts, or Both. Volume 01.05
A740-98 Specification for Hardware
Cloth (Woven or Welded Galvanized Steel Wire Fabric). Volume 01.06
A741-98 Specification for
Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail. Volume 01.06
A742/A742M-98 Specification for Steel
Sheet, Metallic-Coated and Polymer Precoated for Corrugated Steel Pipe. Volume 01.06
A743/A743M-98a